Blank NIM Modules – Models 400A, 400B, and 400C
ORTEC offers blank modules in three standard NIM widths, single-width (400A), double-width (400B) and triple-width (400C), to provide the experimenter with the option of packaging special-purpose electronics in a standard configuration. Blank modules are shipped fully assembled and each one is provided with 10 connector pins that are prewired with 25.4 cm (10 in) leads for easy integration with the experimenter’s electronics.
Blank NIM Panels – Models 400-1B, 400-2B, and 400-3B
ORTEC offers blank panels in three standard NIM widths, single-width (400-1B), double-width (400-2B) and triple-width (400-3B).
Magnetic Shield – Model 218
Magnetic shields are recommended for use with photomultiplier tubes to reduce the interference from either the earth’s magnetic field or from stray magnetic fields from other equipment. The model 218 is for use with 2 inch diameter photomultiplier tubes and the ORTEC model 265 Tube Base. The model 218 is nominally 12.7 cm (5 in) long and 7.6 cm (3 in) maximum outside diameter.
Signal Splitter – Model MT050
One input provides two equal half-amplitude outputs and still preserves 50-Ω termination; reflection, typically 10% (dc to over 500-MHz equivalent bandwidth); rise time, 1 ns; continuous input power, 1 W.
Custom Cable Assemblies
- C-18-X-S – Microdot 100-Ω Miniature Cable with two Microdot male plugs.
- C-19-X-S – Microdot 100-Ω Miniature Cable with one Microdot male plug and one BNC male plug.
- C-24-X-S – RG-62A/U 93-Ω Cable with two BNC male plugs.
- C-25-X-S – RG-58A/U 50-Ω Cable with two BNC male plugs.
- C-34-X-S – RG-59B/U 75-Ω Cable with one SHV female plug and one MHV male plug.
- C-36-X-S – RG-59B/U 75-Ω Cable with two SHV female plugs.
- C-43-X-S – RG-59B/U 75-Ω Cable with one SHV female plug and one open end.
- C-45-X-S – RG-62A/U 93-Ω Cable with one SHV female plug and one BNC male plug; mates Model 807 Vacuum Chamber to Models 142AH, 142IH, and 142PC Preamplifiers.
- 121-C1-X-S – Preamplifier Power Cable Extender.
- 401-C3-X-S – Module Extender Cable.
- C-16 – Male Microdot to Female BNC
- C-17 – BNC to Microdot Adapter
- C-17 – Male BNC to Female Microdot
- C-29 – BNC Tee Connector
- C-30 – Female Microdot to Female Microdot
- C-31 – Male BNC to Male Microdot Connector
- C-31 – Male BNC to Male Microdot
- C-46 – SHV Tee Connector
- C-46 – SHV Tee Connector
- C-62 – Female BNC to Female BNC Connector
- C-62 – Female BNC to Female BNC
- C-63 – Male SHV to Male SHV connector
- C-63 – Male SHV to Male SHV
- BL050 – Male BNC to Female LEMO
Bulkhead Mounted Jacks
- C-13 – BNC to Microdot Vacuum Feedthrough with Female BNC and Male Microdot
- C-38 – SHV Male Bulkhead Jack